• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Clutch release arm / fork gaiter ; Toyota 5 speed conversion

Share this page

B

BBH

Senior Member
Country flag
Offline
All,

Re the Toyota gearbox conversion and specifically in respect of the bellhousing, there is a rectangular hole where the clutch release fork comes through to link with the slave cylinder. With the kit I purchased I didn’t get any form of gaiter /
seal, but I have seen mention of them.

Does any-one have a part reference (Toyota or otherwise) for the gaiter / seal.
 
Just curious did you get your kit from Pete anyway the number your looking for is Toyota bellhousing rubber #31126-20060 good luck
 
Many thanks for the part number reference - just what I was looking for.

Re the kit, I did try to contact Peter a few times (e- mail and phone) but no-Lucy so I bought a kit from a UK supplier
 
Back
Top