Click-it or ticket...78 Midget needs seatbelts!

[walshja]

lbc_newbie

Just found these in my garage, I have a set of seatbelts that you can have for the cost of shipping.

I bought them off eBay back in September, I needed the drivers side receptacle, as the hard plastic sleeve on my car was broken.

So you can have what I have left over if you want: 2 seat belt units, and 2 receptacles (1 broken but still functions)

Let me know if you are interested.

 

[lbc_newbie]

Awesome! I have one seatbelt from the car that is original that I can use for parts. Let me know what shipping is to Seattle. USPS Priority is usually flat rate 9.80...should be able to shoe-horn them into the box! Thanks!

Also, let me know how I can pay you for this!

 

[walshja]

send me a PM with your address, I might be able to get them in the mail tomorrow.

you can send me a check, or paypal me the amount, you tell me.

 

[jlaird]

Durn, the BCF strikes again.

What a wonderful group of folks.

 

[Midget78]

Yo Ed... I need to get a digital camera and load some pictures on line for you. My old man has a camera laying around that Im going to drive over and use as soon as the weather gives me a window of opportunity. That way I can show you the brackets and my Weber setup and what I did so the oil wouldnt blow out of the dipstick. Both were easy fixes. The brackets were at Home Depo in the "hinge" section where they sell doors and stuff. Every store is somewhat the same but if you describe them to one of the floor workers they should point you in the right direction. Im an engineer and have learned at this point in my career that if you can envision it then its probably been created and out there somewhere. Nothings invented, its just re-invented. Home Depo I always can find "pieces" to put together to ceate what I need. The oil blowing out of the dipstick was resolved from a piece of 3 way metal pipe from there.

 

[lbc_newbie]

Thanks Dog! :cooler:

 

[bighly]

I just installed a pair from VB very nice indeed!!