• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Can anyone confirm that if you replace the ammeter with a voltmeter ( generator removed and alternator added) that you......

I believe you could put both ammeter terminals on one side of the vm and ground on the other .
Tom
I never tried that. It was recommended that I run a white wire from the ignition key to the voltmeter gauge and the other side to ground.
 
With any of the brown wiring the 12V is not switched. A minimal draw from the volt meter would result. The white wiring is switched.
 
Back
Top