Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
boxofparts
Senior Member
Offline
Any tips on fixing this busy tach on my MGB?
[video]https://studio.youtube.com/video/-_jbLrLVex0/edit[/video]
[video]https://studio.youtube.com/video/-_jbLrLVex0/edit[/video]
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
MGB busy tach on 1979 MGB at 75 mph
- Thread starter boxofparts
- Start date
Share this page
Offline
Tacho picks up a pulse via the dizzy/coil. Would start there and look for loose or dirty connections.
You may find that the problem is in the dial.
You may find that the problem is in the dial.
YakkoWarner
Jedi Warrior
Offline
At 75MPH you are probably spinning close to 4000 RPM (unless you have an OD transmission in which case more like 3500) - could you be experiencing a missfire which just happens too quick to notice but causes the tach to drop, then pick back up, with the momentum of the needle causing the wild swings?
OP
boxofparts
Senior Member
Offline
I thought about misfire but the engine is pretty smooth. I need to check wires to make everything is clean and well connected. The service manual states there is a loop of wire in the tach. I wonder if I put a loop of wire around a magnet like I have on some of my power cords? Toroid choke?