Wanted BUGEYE SHIFT LEVER

[rossco]

I need the later style rib case shift lever with the longer "nose". Someone installed a smooth case lever and it has caused issues. Any help would be appreciated. R

 

[Scargo]

I have a spare but it’s a shorty in lieu of standard length.

 

[BillyBud]

Very interesting, and except for this post I would have assumed they were both the same, interchangeable. I have both, which I want to keep, but if you need measurements or any assistance like that just PM me. The "nose" is indeed longer on the original by about 5/32". I supposed if one were super clever and an accomplished welder you could slice the new shifter nose and weld in a spacer to make the nose longer. If you zoom in it looks like they might have done that to make it shorter, like they took a slice out.

 

[rossco]

BillyBud. 5/32" is the info I was looking for. I'll see what the guy at the welding shop can do. Thanks for the help. I've been stymied. R

 

[BillyBud]

BillyBud. 5/32" is the info I was looking for. I'll see what the guy at the welding shop can do. Thanks for the help. I've been stymied. R

You can buy what you need at > Sprite Transmission Parts | Taylor Race Engineering <
Listing says $20/

 

[rossco]

BillyBud. Thanks for the parts contact. The $20.00 listing I found for them was for a stock Bugeye lever. That sounds like a smooth case part. I left them a note to contact me. We'll see if that happens.

 

[BillyBud]

Here's another, price prohibitive but some useful info. > Correct ribbed-case shift lever <