• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Bugeye bonnet mounted on later sprite or midget?

Share this page

Thanks for that info Trevor. I've been wondering about scraping since you all mentioned it.
I figure that if the hinge is horizontally lower than the rear bonnet corners, then they won't scrape.
 
Golden_Swan said:
Thanks for that info Trevor. I've been wondering about scraping since you all mentioned it.
I figure that if the hinge is horizontally lower than the rear bonnet corners, then they won't scrape.
Click to expand...

<span style="color: #FF0000"><span style="font-size: 14pt">THAT's The KEY!!</span></span> :thumbsup:

ALTHOUGH some bonnets have enough "flex" & "wobble" in them that the rear bonnet corners can still scrape a bit.
This is best controlled by ensuring that your bonnet structure is sound, & by either adding "guide" brackets to assist in the proper alignment of the rear bonnet panels to the cowl & the sill panels, or by having a few extra hands available to help guide the bonnet as it is closed.
 
Back
Top