• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Bugeye 5 speed clutch line

Share this page

Rut

Rut

Obi Wan
Country flag
Offline
I'm getting ready to install the clutch hard line in my Bugeye and would love to see some pictures of what y'all have done. My current plan it to install a hard line similar to an MGB with a flex line from there to the slave. Thoughts?
Thanks, Rut
 
This is how I did mine.

P1030864.jpg
 
Alan,
Thats exactly the info I'm looking for!
Thanks, Rut
 
I just rolled a 360 deg. loop in the tubing to dampen the worst of the vibrations and connected it directly to the slave cylinder. Been in use for over 10 years now with no problems. But I must admit, Blue Max's solution is much more elegant.

Griz
 
BlueMax said:
This is how I did mine.
Click to expand...

That's really helpful for me as well. That's what I'm planning to do, nice to see it done cleanly.
 
Griz said:
I just rolled a 360 deg. loop in the tubing to dampen the worst of the vibrations and connected it directly to the slave cylinder. Been in use for over 10 years now with no problems. But I must admit, Blue Max's solution is much more elegant.

Griz
Click to expand...
That's how I have done mine. Worked for the factory for decades.
Kurt
 
Back
Top