• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Brosky

Share this page

I can get it, but not until Tuesday morning. I think that it's still at Erik's shop, but I'll be out of town tomorrow and not returning until Tuesday to be able to pick it up.

Shannon, can you get your cam out for Searcher?

If not and you can wait, I'll get mine asap.
 
Thanks, I'd like to have the measurements from the rear edge of the retainer groove, to the front edge of each lobe, including the fuel pump lobe. Please make sure the camshaft you use has stanpart on it.
 
These are dimensions for the Stanpart cam I pulled out of my 73 TR6, plus/minus 0.1" non cumulative

lobe 1 0.5"
lobe 2 2.5"
lobe 3 4.0"
lobe 4 6.0"
lobe 5 7.3"
lobe 6 9.2"
lobe 7 10.8"
lobe 8 12.6"
lobe 9 14.0"
lobe 10 15.8"
fuelpump 16.8"
lobe 11 17.4"
lobe 12 19.5"
 
Back
Top