My BJ8 sway bar end links were bent at the threaded ends so I fitted new ones with urethane bushings from Moss along with urethane centre bushings.
Now the R link has broken on the bottom end at the thread where the bushing is located
Difficult to see how I could be installing it incorectly but it would not be the first time.
Am I doing something wrong, or is it the urethane bushings
Now the R link has broken on the bottom end at the thread where the bushing is located
Difficult to see how I could be installing it incorectly but it would not be the first time.
Am I doing something wrong, or is it the urethane bushings