• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

brake light works but not at night

Share this page

Woodie

Woodie

Jedi Warrior
Offline
My driver side brake light works, so does my passenger side, during the day with no lights on. I went for a drive after dark today for the first time. Headlights on check parking lights in front on, check, tail lights on, check. Come to a stop sign and apply brakes and the passenger brake light works, but the driver side goes dark. No brake , no tail light. Remove foot from brake and tail light comes back on. HUH ???
 
HUH indeed. For some reason your drivers side light is shorting out when the brake circuit is activated. Are there two pairs of wires to the driver rear light or only one? If two, I suspect you have the polarity switched on the brake lights.
 
doin better than me, all i have are headlights right now! haha..it all worked one day; )....zimmmy
 
nope only two wires to the light, one for tail light (low brightness filament) and one wire for the brake (full bright filament in the same bulb)
 
AND the first rule ofLUCAS,, ground, always the ground, nothing but ground. I had a bad ground on the driver side. tightened up the securing nuts and voila brake lights at night.
 
Back
Top