• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Brake light switch

Share this page

Jack_Long

Jack_Long

Jedi Hopeful
Offline
Is it really necessary to unbolt and lift the whole pedal box to get the brake light switch out of a 1973 Midget? If so, can this be done without having to disconnect the hydraulics?

What a great design!
 
I replaced mine on a 79 midget. Yes you have to unbolt the whole thing, but I didn't have to disconnect any hydraulics or any other connections.
 
On my 78 the top of the box comes off. Maybe that's what you were referring to?
 
I took the top off, but it really wasn't necessary. The way the switch is built there is no room to turn it as it sits. I only had to raise it up a couple inches.
 
You can always dent the inner fender for a bit of clearance.
But yes, loosen the pedal box and lift it up a little to remove the switch.
 
I definetly thought about breaking out the BF hammer. I mean, who is going to know?
 
Mine turned in without all that.
Seems to be a later model Lucas part.

See it here: Brake Switch

Working great too!
 
Back
Top