-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Brake flaring tool
- Thread starter drooartz
- Start date
Share this page
TR3driver
Great Pumpkin - R.I.P
Offline
Almost doesn't matter if you use Cunifer line; it flares easily. OTOH I once made the mistake of buying some pre-flared steel line at FLAPS, and that stuff was nearly impossible to flare successfully. I tried several different tools, finally managed to get a barely acceptable flare using a Snap-On tool kit borrowed from a local garage. Still not pretty, but good enough.
twas_brillig
Jedi Knight
Offline
I was just looking at the Fedhill brake line etc. site, and they'll sell your or rent you a 12 pound flaring tool. "$25.00 for the first two weekends,(time in shipping not counted) then $25.00 per week after that, plus $375.00 security deposit. $400.00 will be charged to your credit card. " Doug
Offline
I would purchase one out of the UK. They are near $200 us and you will be happy.
BlueMax
Jedi Warrior
Offline
This kit is an excellent kit. Very precision flares every time!!
https://store.snapon.com/Flaring-Tool-Sets-Blue-Point-Set-Double-Flaring-Tool-P644043.aspx
https://store.snapon.com/Flaring-Tool-Sets-Blue-Point-Set-Double-Flaring-Tool-P644043.aspx
Roger
Luke Skywalker
Offline
I'm sure it is, but it won't necessarily make all you need for a British car.
TR3driver
Great Pumpkin - R.I.P
Offline
That looks to be the same kit I used. Didn't work "every time" for me, but I got a usable bubble on the 3rd or 4th try. Grinding a nice, smooth chamfer on the end of the line seemed to be the trick, along with lots of lube.
