Suncoaster
Member
Offline
Hi everyone,
Can somebody point me to a photo that would show the points at which a tub brace should be attached prior to the tub’s removal from the frame? I found a pic on the home page of Macy’s Garage that shows a brace arrangement, but I can’t tell for certain where it’s attached. The rear of the brace looks like it might be attached to the rear wheel arches – would the fronts of the brace be bolted/welded to the body mount points close to the fronts of the doors? Also, the car (center image) still has the wings, bonnet, and boot lid attached. https://www.macysgarage.com/
Several searches didn't yield much in the way of specifics. I went through John’s (CJD’s) “Beginning the TR2 Bodywork” thread, but all the photos I found of the tub showed no bracing that I could see. Here’s a link to the photos I found (pics start at post #168). https://www.britishcarforum.com/bcf...ning-the-TR2-Bodywork/page9&highlight=bracing
Again, thanks in advance to all for any info.
Can somebody point me to a photo that would show the points at which a tub brace should be attached prior to the tub’s removal from the frame? I found a pic on the home page of Macy’s Garage that shows a brace arrangement, but I can’t tell for certain where it’s attached. The rear of the brace looks like it might be attached to the rear wheel arches – would the fronts of the brace be bolted/welded to the body mount points close to the fronts of the doors? Also, the car (center image) still has the wings, bonnet, and boot lid attached. https://www.macysgarage.com/
Several searches didn't yield much in the way of specifics. I went through John’s (CJD’s) “Beginning the TR2 Bodywork” thread, but all the photos I found of the tub showed no bracing that I could see. Here’s a link to the photos I found (pics start at post #168). https://www.britishcarforum.com/bcf...ning-the-TR2-Bodywork/page9&highlight=bracing
Again, thanks in advance to all for any info.