-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Boot Brace Rivits?
- Thread starter Keoke
- Start date
Share this page
Skip & Lynne
Jedi Warrior
Offline
Re: Boot Brace Rivits?
Hi Keoke I used dead soft 1/8 2004 aluminum rivets and taped both sides and used a squeezer. Skip
Hi Keoke I used dead soft 1/8 2004 aluminum rivets and taped both sides and used a squeezer. Skip
GregW
Yoda
Online
Re: Boot Brace Rivits?
Hi Keoke,
They’re called tubular rivets. I think they can be had at:
Culver City Hardware
5429 Sepulveda Blvd
310 398 1251
That’s where I bought those copper pop rivets I mentioned a while ago. One piece per hole. The hollow end gets expanded. I made a riveter out of a C-clamp with a center punch welded to it. See this thread for a photo. I balked at the price of a real squeezer for the small job I needed it for. The one downside is a little crease that gets made in the head of the rivet. I can work on fixing the tool. I just did a light sanding of the rivet head once they were installed. You can borrow mine if you want. I’ll be going to Downey on Friday passing your neck of the woods.
Hi Keoke,
They’re called tubular rivets. I think they can be had at:
Culver City Hardware
5429 Sepulveda Blvd
310 398 1251
That’s where I bought those copper pop rivets I mentioned a while ago. One piece per hole. The hollow end gets expanded. I made a riveter out of a C-clamp with a center punch welded to it. See this thread for a photo. I balked at the price of a real squeezer for the small job I needed it for. The one downside is a little crease that gets made in the head of the rivet. I can work on fixing the tool. I just did a light sanding of the rivet head once they were installed. You can borrow mine if you want. I’ll be going to Downey on Friday passing your neck of the woods.
OP
Keoke
Great Pumpkin
Offline
Re: Boot Brace Rivits?
OK Greg, I Know that place I will check there tomorrow.The shop that is loaning me space is closed until tuesday so I will not be doing anything until then.I may bite the bullet and buy the anvil for the rivits and use a "C" clamp too.I sincerly appreciate your offer and I may just end up borowing it in the end.Thanks Much---Keoke
OK Greg, I Know that place I will check there tomorrow.The shop that is loaning me space is closed until tuesday so I will not be doing anything until then.I may bite the bullet and buy the anvil for the rivits and use a "C" clamp too.I sincerly appreciate your offer and I may just end up borowing it in the end.Thanks Much---Keoke
Skip & Lynne
Jedi Warrior
Offline
Re: Boot Brace Rivits?
Hi Keoke if you use the solid rivets the worked or driven end should be 1&1/2 times the origional rivet shank diameter. Skip
Hi Keoke if you use the solid rivets the worked or driven end should be 1&1/2 times the origional rivet shank diameter. Skip