• Hey Guest!
    BCF is a FREE resource for the Little British Car community. I just did a little math and found that less than 1% of the registered members appreciate this forum enough to support us with an account upgrade. We do not "require" you to pay to play here, but if you find BCF helpful, appreciate no pop up ads, and want to ensure we stay online - Consider supporting us with an "optional" low-cost member upgrade. There are some benefits to upgrading!
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Bonnet release handle on BJ8 position

richberman

Jedi Warrior
Offline
Does anyone have a picture of where the bonnet release handle sits in relationship to the glove box on a BJ8?
thanks,
rich
 
richberman said:
Does anyone have a picture of where the bonnet release handle sits in relationship to the glove box on a BJ8?
thanks,
rich
I don't have a photo because I'm not at the area yet but it sits right below the glovebox. If you have straightened it thinking it was bent and needed correcting, you'll have to rebend it back to where it (probably) was orginally bent.
Patrick
 
There you are;

DSC04587.jpg


Hans
 
Legal Bill said:
Note well the grommet popped out of the bracket. :lol:

Two things can account for that.

1] The grommet is old and tired.
.
2] the handle was not aligned and bent properly,
 
NO Rich but it involves the under bonnet alignment of the rod and the additional rod support and grommet there also.---Keoke
 
Did they change the handle for the BJ8, it looks like my BN7
 
Legal Bill said:
Note well the grommet popped out of the bracket. :lol:

Look even better and you see the heaterhose is disconnected from the engine ... still some work to do ...

The grommet is torn, the rod is still oké

Hans
 
The pull rod is actually the same part from the earlier roadster models, but with the BJ8 the grommet through the bulkhead is about 4" lower to help it clear the glove box liner on the inside of the car. Also the previous models have a shorter welded steady bracket up higher under the dash, while the BJ8 eliminates that and installs the lower bracket shown in the previously posted picture. Out on the bulkhead (firewall)the earlier grommet and rod position is simply plugged on the BJ8.
 
Similar threads
Thread starter Title Forum Replies Date
Bayless Help please installing bonnet release cable Spridgets 8
C Bonnet Latch/Release Adjustment Austin Healey 3
K Austin A95 bonnet release lever? Other British Cars 0
6 Bonnet Release Spridgets 3
B bj8 bonnet release broke Austin Healey 11
I TR6 Bonnet release cable Triumph 3
RJS Emergency hood/bonnet release Triumph 22
W E type bonnet release Jaguar 0
J Sprite Bonnet release cable routing Spridgets 2
Darrell_Walker TR4/4A Macy's Garage TR4-6 bonnet release kit mini-review Triumph 24
jvandyke hood [bonnet] release broken cable Spridgets 34
J TR4/4A Bonnet release on a TR4 Triumph 12
JPSmit Hood [Bonnet] release question Spridgets 1
Geo Hahn E-Type Broken Bonnet Release Jaguar 21
P Quick release bonnet hinges? British Motor Corp 3
N Bonnet release cable routing? Triumph 13
ScottTR6 Emergency bonnet release Triumph 12
weewillie bonnet release Spridgets 2
MadRiver Emergency Bonnet Release Install Q's. Triumph 10
TR4nut Poor Man's Emergency Bonnet Release - It works! Triumph 5
M Frozen Bonnet Release Despite Warm Weather! MG 8
C Bonnet release stuck MG 10
oldbagpipe For Sale 1961-1962 Triumph TR4 Short Bubble Bonnet (hood) Triumph Classifieds 0
CARSINC Sprite bonnet emblems Spridgets 4
J Wanted Hood (Bonnet) for a 1960 BT7 Austin Healey Classifieds 0
E TR6 TR6 flip-up bonnet question Triumph 4
KVH General Tech Fitting the Hood (Bonnet) Triumph 7
D Wanted Bugeye bonnet (hood) fiberglass or steel Austin Healey Classifieds 0
B Wanted Bugeye front bonnet fender mirror like this Spridgets Classified 5
mctriumph For Sale Tr4 Short bubble Bonnet Triumph Classifieds 2
shadowfever Wanted Need a Sprite Mk II bonnet Spridgets Classified 1
LAW75 Bonnet Excessive Sway Austin Healey 6
M Wanted Looking for genuine Austin-Healey bonnet badge Austin Healey Classifieds 1
K TR2/3/3A The Louvered Bonnet? Triumph 2
J Wanted 1960 Sprite Bonnet Spridgets Classified 3
J Wanted Austin Healey Sprite Bonnet Austin Healey Classifieds 4
Pythias Sprite Winged Bonnet Badge.... ANYONE? Spridgets 16
mch979 1967 MGB GT bonnet issue MG 25
P MG TD Bonnet Upper Sections MG Classifieds 0
longbridgehealey Bonnet stay Spridgets 3
J Bonnet rubbing Spridgets 12
S Forward opening hood / bonnet Spridgets 10
R Mark III Bonnet Badge Austin Healey 9
F TR2/3/3A Bonnet safety hook Triumph 10
B Wanted I need a small section of a bugeye bonnet Spridgets Classified 5
B Bonnet hinge gasket Spridgets 10
oldbagpipe SOLD!! Early TR4 Short Bubble [Bulge] Bonnet/Hood Triumph Classifieds 5
GeorgetheTR3 TR2/3/3A Bonnet popper, or something like that. Triumph 5
B Under bonnet fuel Austin Healey 15
charleyf TR2/3/3A Bonnet safety catch Triumph 0

Similar threads

Back
Top