• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Bolt sizes

Share this page

Stewart

Stewart

Darth Vader
Country flag
Offline
Any one know what the sizes and thread of the bolts that hold the transmission to the block. I remember it being a somewhat oddball size. Also the bolts that hold the starter in and finaly the bolts that hold the alternator bracket to the block

Thanks
 
Don't know the sizes but do you need some?
 
IIRC, they're all fine thread. 5/16" seems to be my recollection. I'd not do this for many folk, Stew... If you can hold off 'til the AM t'morrow I'll confirm. /bcforum/images/%%GRAEMLIN_URL%%/smirk.gif
 
I'd apreciate it DrEntropy. I should be good on finding the starter and alt bracket bolts tony but I think the fun part is going to be finding the right lenth bolt to mount up the block to an engine stand. I had a hard time finding them last time and I'm kicking my self in the butt for tossing the last set I had.
 
Here ya go, Stew: 5/16" NF for the tranny: top two are 2", three for the side are 2-1/2" and the bottom two are 3". I've used Nylok nuts on mine. Starter has shouldered 1/2" NC, 2" long to thread into the transmixer bell-housing... Keep in mind this is a 3-synchro bolted to an 18GB. YMMV. /bcforum/images/%%GRAEMLIN_URL%%/wink.gif
 
*BUMP!* /bcforum/images/%%GRAEMLIN_URL%%/jester.gif
 
No biggie... I did it before the fire ants were awake. /bcforum/images/%%GRAEMLIN_URL%%/smirk.gif
 
<div class="ubbcode-block"><div class="ubbcode-header">Quote:]5/16" NF for the tranny: top two are 2", three for the side are 2-1/2" and the bottom two are 3". [/QUOTE]
Just checked some I took off a '73 18V/4-syncro box...they're the same.
 
/bcforum/images/%%GRAEMLIN_URL%%/thumbsup.gif That's three... a consensus... Good to go!
 
Back
Top