• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

BN6: Shock absorbers do not fit after renewing the link arms

Share this page

GregW said:
It was mentioned earlier to get measurements of the stud diameters. The taper in your first photo looks more drastic on the new piece. Also much wider.
Click to expand...

From length the old an new ones are the same. The taper/cone of the new one is a little bit (about 0,4 mm/0,40 inch) thicker at both sides. But the old link arms are really worn out.

I bought mine at Limora, a German supplier. Will try to get one from Moss or AH spares.

Volker
 
Back
Top