• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

BN2 Trans-reverse problem

Share this page

E

elgatto

Freshman Member
Offline
I have owned this car since 1983 and I have always had a problem shifting into reverse. It seems I can't get the gears to fully mesh and hold in reverse. I must really pull to the left and back real hard on the shifter to engage reverse and if I am backing up a hill, I must hold the shifter lever down to keep it in reverse. Is there some adjustment that I might do to remedy this problem? Thanks.

Mike
 
Hi Mike,
The only easy problem to fix would be if the shifter boot or carpet were preventing the lever from going all the way or a problem with shifter bottom bushing wear. (A small sleeve that goes over the inside bottom shifter ball.) These can be checked from top side. Otherwise it is likely to be internal shifter wear, or gear/bearing wear.
D
 
Back
Top