• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

BN2 Pedal Firewall Pad- Dust Extruder Thickness?

Share this page

M

mwagon

Jedi Hopeful
Country flag
Offline
What's the correct thickness for the Pedal rubber pieces that get glued to the engine side firewall? They seem to act like a Bumper & Seal.
 
First off they do not get glued to the engine side of the firewall, they are mounted onto the steel pedal flanges that will come to rest on the engine side of the toeboard, basically covering the pedal holes. They are about 1/2" thick and will tend to compress a bit over time. Their presence will have to be taken into account when adjusting both brake and clutch free length when at rest.
 
Back
Top