• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

BN1 & BN2 Engine # Plate Finish

Share this page

I think you're right.

I wonder what's printed on the tag. Obscure info. I just found out what was printed on the tag attached to the hood frame...
 
Hi Bill,
Randy has not posted the photo of the tag on the engine yet. Take a look at post #12 for the tag on the engine.
 
Hi Bill,
The decal on the oil filter housing is not a decal but an aluminum tag rivited to the housing. It has the Tecalmit part number on it for the filter replacement.
 
I'm not convinced the car in Post 12 is a low mileage car. So much paint has worn off of the engine and accessories I wouldn't be surprised that it came off the tag as well.

My restored 100 has a lot more than 5000 miles on it and it looks a lot better than this car. And it has been a driver for several years without much attention paid to the engine paint.
 
Back
Top