• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

BJ8 Windscreen

Share this page

D

dancrim

Jedi Hopeful
Country flag
Offline
I have a new bottom gasket (rubber) that goes along the bottom of the windshield the entire length and seals against
the front shroud. Has anyone replaced one and how do I get the lower chrome piece off in order to replace it?
 
The only wat to do it is to remove the entire windshield assembly from the door jambs. Then you can lay it down on your workbench and remove the old seal and install the new one.
 
Hello dancrim,

Besides removing the bolts from the two posts, there should be one bolt in the inside of the windscreen. You'll see it when you remove the wood dash top. If you don't see it there, then it's missing....duh.

To make sliding the new rubber in the slot easier, use liquid dish soap. You'll thank me later. :banana:
Roger
 
Back
Top