-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
BJ8 console redo?
- Thread starter wangdango
- Start date
Share this page
RAC68
Darth Vader
Offline
Wangdango,
The console on a BJ8 is one of the simplest to upholster as there is no stitching as part of its main covered section (radio area through shifter). I have not only recovered my original console as part of my main refresh back in the late 1980s (and can be seen on pages 90 through 95 of "Austin-Healey 100 & 3000) as well as the slightly wider console I created to accommodate a Bose sound system (below).
The choice is definitely yours to do or not as I don't believe it would require special skills.
Good luck,
Ray(64BJ8P1)
The console on a BJ8 is one of the simplest to upholster as there is no stitching as part of its main covered section (radio area through shifter). I have not only recovered my original console as part of my main refresh back in the late 1980s (and can be seen on pages 90 through 95 of "Austin-Healey 100 & 3000) as well as the slightly wider console I created to accommodate a Bose sound system (below).
The choice is definitely yours to do or not as I don't believe it would require special skills.
Good luck,
Ray(64BJ8P1)
Healey Nut
Luke Skywalker
Offline
Done , about 4 hrs including de corrosion and painting the metal shell .
i dont think repros of the edge strips are available . Dont think they are chrome but stainless . Just be careful removing them not to bend/crease them .
1/4 “ foam on the sides before the fabric to give it some cushion. Use spray contact adhesive.
i dont think repros of the edge strips are available . Dont think they are chrome but stainless . Just be careful removing them not to bend/crease them .
1/4 “ foam on the sides before the fabric to give it some cushion. Use spray contact adhesive.
Attachments
Bobbydsport
Member
Offline
I also did mine but be aware that the small screw studs & nuts on the back of the console that are attached to the metal strips & hold the strips down are almost always corroded & the small studs will ring right off if given a chance ( ask me how I know). So soak them liberally with penetrate & let them sit overnight or more before you attempt to remove the nuts.
Bobbyd
Bobbyd
https://www.ahspares.co.uk/big-healey/Dashboard-Console/default.aspx
Only company I know that has the stainless strips. And, only for the later BJ8 which will be all cars but the early car that has a console that opens.
Jerry
Only company I know that has the stainless strips. And, only for the later BJ8 which will be all cars but the early car that has a console that opens.
Jerry