• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

BJ8 Carpet Padding

Share this page

T

TodE

Jedi Hopeful
Offline
OK so I have seen all kinds of padding for carpets. I am replacing my carpets on my BJ8. I used the jute padding from Heritage on my 100. If I remember correctly it was about 1/4" or 3/8"? I am going to use Dynamat on the floor pans. What is a good padding to use?

Thanks,
Tod
 
When I redid my BT7 a few years ago, I installed Hushmat, then a layer of bubble wrap with foil on both sides followed by the carpet which had about 3/8" padding attached. The whole system was about 3/4" thick. While I may have lost some interior space the reduction in cockpit heat was well worth it.
 
Heres my 67 before the main carpet sections went in . Thats the jute from Victoria British over everything including the tunnel . Under that is that sticky rubberized foil backed heat blocker stuff . It goes from right up the front of the footboxes
all the way to the rear kickpanel .
 

Attachments

  • 11C29EE3-7BEE-4DE0-98DE-CD3FAF234C18.jpg
    11C29EE3-7BEE-4DE0-98DE-CD3FAF234C18.jpg
    57.1 KB · Views: 185
TodE said:
Healey Nut is the jute 1/4"?

Thanks for all your help!
Click to expand...

Yes , thats what it says on the VB website , and the foil heat matt stuff ads another 1/8” ish
 
Back
Top