• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

BJ8 Air Cleaners - correct finish?

BJ8Healeys

Jedi Warrior
Country flag
Offline
I believe the correct color/finish for the air cleaners was a silver "hammertone". Hammertone is like a finish obtained from painting over an oily surface -- lots of "fisheyes". I've seen hammertone paints in spray cans at the local auto parts store, but I just painted mine a flat silver.
 

Rob Glasgow

Jedi Knight
Country flag
Offline
Not sure about a BJ8, but my BT7 had a silver hammertone finish. I repainted with Rustoleum silver hammertone paint and they looked correct to me.
 

dougie

Luke Skywalker
Country flag
Offline
Hammertone Silver is the best modern replacement for the original finish. When the paintings done, complete your project with the correct Coopers water transfer decal, not the cheap looking white/blue sticker many suppliers carry.

https://www.britishcarspecialists.com/pdf/austin-healey-rare-hard-to-find-oct2010.pdf page # 21

DSC09607.jpg
 

jjs64bj8

Senior Member
Offline
I was told that Rustoleum Hammered Metal Finish Spray, Silver is an almost exact copy of original finish. I just bought a can at Lowes for around $8. I have not yet cleaned and painted my BJ8 air cleaners. So I can not verify this as of yet.

jjs64bj8
 

Keoke

Great Pumpkin
Country flag
Offline
Well:
Probably not correct but chrome plating them solves a lot of problems with these original filter units.--FWIW
 
OP
S

SteveHall64Healey

Jedi Trainee
Offline
thanks I will look for that finish. Does this paint require primer or just straight on to clean metal?

And I do have the correct water transfer decals. In the past, I found these require some skill in installing, so I bought 3 - one to learn on the other two for the air cleaners.

steve
 

Rob Glasgow

Jedi Knight
Country flag
Offline
I didn't prime before the Rustoleum when I repainted mine 10 years ago. I used the water transfer decals and found that after a few years of normal wear and tear and power washings, the lettering on the decals faded quite a bit. Maybe they have improved them.
 
OP
S

SteveHall64Healey

Jedi Trainee
Offline
I didn't prime before the Rustoleum when I repainted mine 10 years ago. I used the water transfer decals and found that after a few years of normal wear and tear and power washings, the lettering on the decals faded quite a bit. Maybe they have improved them.

Rob, did you use the Rustoleum Hammered Metal Silver spray as recommended above? if so, how did it come out?
thanks,
Steve
 

Rob Glasgow

Jedi Knight
Country flag
Offline
Yes that's what I used 10 years ago and will use again on this complete restoration I doing now. It looks very 'correct'.
 

BOBBYR

Jedi Trainee
Country flag
Offline
Hey Steve , I know we all like to stay with original but when I cleaned the air filters on my 65, I buffed them out on a wheel and they came out awesome . After buffing, used a good polish, and they still look great. You have to clean them anyway to paint. Polishing the carbs and linkage really lights up the engine appearance too. Just a thought.
Bobby R
 
OP
S

SteveHall64Healey

Jedi Trainee
Offline
Hey Rob, I tried the Rustoleum finish. Excellent recommendation - this paint covers well, gave an even finish and looks very much like the original.
thanks,
steve
 
Last edited:

Top Down Resto

Senior Member
Country flag
Offline
FYI Hammerite brand hammered silver has a bluish silver grey cast

Rustoleum brand hammered silver has the silver grey cast ( I prefer ... and correct for Jag XKE air cans and trumpets )

with both you can go over cleaned bare metal or I would prefer PPG DP epoxy grey (thinned out) as a good base

the thicker you make the coats the more it will crater try it out first to get an idea how it sprays ( factory did have had runs and large areas of unevenness so if you let your children paint them for you they would probably pass for concours ! )
 

TodE

Jedi Hopeful
Offline
Just another option. Tiger Drylac makes a "Silver Hammertone" powder coat. I first bead blasted them, soaked them in gas washed them good with soap and water to get as much of the oil & bead dust out. Then I hit them with carb cleaner let them dry out good then baked them in the oven at 250 F to burn off any grease. Applied the powder coat looks brand new. Kind of a long process, but I am hoping I do not have to do again for a long time.
 

Legal Bill

Jedi Knight
Country flag
Offline
Painting the outside is all well and good, but what are you doing to restore the business end of these 50 year old air cleaners? That 50 year old steel wool ain't what it used to be. There was an article in Healey Marque some time ago about how to open them up and then seal them up again.
 

Keoke

Great Pumpkin
Country flag
Offline
Painting the outside is all well and good, but what are you doing to restore the business end of these 50 year old air cleaners? That 50 year old steel wool ain't what it used to be. There was an article in Healey Marque some time ago about how to open them up and then seal them up again.

Chrome plate them this gets the wool inside clean and makes cleaning them easy.
However your plater may hate yau it is a bit of a process mine told me.--:glee:
 

jjs64bj8

Senior Member
Offline
Today i used the Rustoleum "Hammertone" on a 70 degree day and the finish was just a solid silver. There was no hammertone to it. I could have just as well used regular silver paint. Is there some special trick in spraying this stuff, of do I have a bad can. Yes I did shake it up a lot.

As for cleaning the air cleaners, what I did was to soak them in a mixture of Gunk (not the spray can but the liquid) and diesel fuel (can use kerosene) for several days. Then soaked in gasoline for a day or so. Dried them and then soaked in Pine Sol and water mixture (1:3) for a few days. The steel fibers inside came out looking very clean.

Now if we can just get the finish correct. Any suggestions?

jjs64bj8
 

GregW

Yoda
Platinum
Country flag
Offline
I've found Hammertone wants to go on thicker than normal paint. There is a balance between too light where the colors don't separate and getting drips.
 

Rob Glasgow

Jedi Knight
Country flag
Offline
I agree with Greg. I've painted several pieces with hammertone last week and you need to put it on ticker than most paint. After you've sprayed it wet, you should see the hammertone effect appear quickly. It takes a bit of practice to get it right. To thick and you will have lots of 'hammertone' effect, to light and it's just silver. Try if on a scrap piece of metal. Once you find the right wetness you like, you should be able to spray right over the current silver only coat and still get the results you want.
 
Similar threads
Thread starter Title Forum Replies Date
Ed_K Modifing the stock BJ8 air cleaners Austin Healey 0
S Water transfer decal on BJ8 air cleaners Austin Healey 5
AUSMHLY Hose, vent pipe to air cleaner, BJ8 Austin Healey 7
Patrick67BJ8 Denis Welch Air Filter for BJ8 Austin Healey 22
L Fresh air and Blower intake hose replacement on BJ8 Austin Healey 12
G K&N air filters for 1967 BJ8 Austin Healey 6
J BJ8 air from heater cable routing? Austin Healey 4
M Air cleaner for HD8 on BJ8 Austin Healey 5
1 BJ8 History Trace Austin Healey 7
Patrick67BJ8 Wanted Looking for a used BJ8 switch panel. Austin Healey Classifieds 5
D BJ8 Top Installation Detail Austin Healey 3
B BJ8 Rear Backrest Hinges Austin Healey 4
S Wanted WTB: 3.5 ratio diff/pumkin for '67 BJ8 Healey 3000 Austin Healey Classifieds 0
AUSMHLY BJ8 Trans Cover Carpet Austin Healey 7
nitro BJ8 Engine Design Austin Healey 1
AUSMHLY BJ8 Carpet and Snaps Austin Healey 2
Overdrive45 BJ8 Interior Trim Austin Healey 8
nitro BJ8 Production Year Austin Healey 6
WHT BJ8 Rear Seat Surround Drain Tube Grommets Austin Healey 0
B BJ8 Seat Sliders Austin Healey 4
B For Sale 1967 Metallic Golden Beige MKIII BJ8 Numbers Matching - The Real Deal Austin Healey Classifieds 0
F Wanted BJ8 Engine Block Austin Healey Classifieds 1
BoyRacer For Sale BJ8 disk wheel hubs, spindles & calipers Austin Healey Classifieds 0
AUSMHLY BJ8 Rear Seat Squab Austin Healey 0
AUSMHLY BJ8 Differential Oil Change Austin Healey 6
S SOLD!! For Sale 1964 AH 3000 MkIII BJ8 Phase 1 Austin Healey Classifieds 2
Patrick67BJ8 BJ8 Factory Hardtop Rear Window Austin Healey 6
AUSMHLY BJ8 Clutch Pressure Plate, Old vs New Austin Healey 4
AUSMHLY BJ8 Clutch Fork Bush Replacement Austin Healey 5
AUSMHLY BJ8 Cylinder Head Installation Austin Healey 6
LAW75 BJ8 Brake Lines Austin Healey 2
AUSMHLY BJ8 Clutch Pressure Plate Brand Preferences Austin Healey 3
BoyRacer For Sale BJ8 spindles & disc wheel hubs Austin Healey Classifieds 0
G Wanted BJ8 Tonneau Cover Austin Healey Classifieds 0
Cutrog1 For Sale Healey 3000 BJ8.... a restoration saga Austin Healey Classifieds 0
AUSMHLY BJ8 Overdrive Oil Passages Austin Healey 2
Scotsman Wiring Diagram for 1966 BJ8 Austin Healey 3
A For Sale 1966 3000 Healey Blue BJ8 Austin Healey Classifieds 3
S BJ8 Front Side Lamp/Turn Signals Austin Healey 1
B BJ7/BJ8 Door Check Straps Austin Healey 10
B BJ8 Hood Bow and Seal Austin Healey 5
Mickey Richaud Wanted Wanted: BJ8 Seat Track Sets (Both Sides) Austin Healey Classifieds 5
Scotsman BJ8 Intake Manifold Differences Austin Healey 4
AUSMHLY Laygear End Float BN1-BJ8 Austin Healey 2
C For Sale BJ8 original dash Austin Healey Classifieds 3
LarryK BJ8 Parts or Project Car For Sale in St. Louis Austin Healey 3
Patrick67BJ8 BJ8 Intake manifold Booster & Vacuum Hookup threads sizes. Austin Healey 2
B BJ8 Centre Console Chrome Strips Austin Healey 5
B Wanted Chrome strips centre console BJ8 Austin Healey Classifieds 0
AUSMHLY BJ8 Cylinder Head Re-Torque Austin Healey 26

Similar threads

Top