• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Best Shop Manual for BE

tiiM5

Senior Member
Gold
Country flag
Offline
Hello all, I am about to begin getting my BE on the road again after many decades of dormancy. I will need to do a front end rebuild, task looks daunting, and will be installing newer 948 and smoothies.
What are your recommendations as to the best shop manual(s) to use for work on BE's?
I have read that the front end can be shipped to a shop for rebuilding and then reinstalled, anyone with experience with this?
I will have additional questions I am sure once I get into things.
Thanks, all assistance appreciated.
 

Rut

Obi Wan
Country flag
Offline
tiiM5,
Welcome to the forum! I second Ricks suggestion and you may want to consider the Bentley manual if an electronic copy doesn't work for you...it's a copy of the factory manual.
Rut
 

apbos

Jedi Knight
Country flag
Offline
Apple Hydraulics and Peter C at World Wide Imports can help you with your front end rebuild and your shocks. The orignal manual, this forum and the search menu will be sufficient to rebuild your B/E. I get to Menlo Park on occasion to visit friends so I might be able to give a hand.
Regards
Paul
 
OP
T

tiiM5

Senior Member
Gold
Country flag
Offline
Gentleman, Thanks for the advice, I'll check each source.
Paul love to meet you, my car is in a garage in San Carlos where my work will be done, save for painting, I still need to source a painter. Looking forward to getting her back on the road. It's original black plate car, I've had it since high school, rebuilt the 948 then, I think Nixon was President, so long time ago.
 

apbos

Jedi Knight
Country flag
Offline
We always want pictures. Mine still has the orignal black plates but I purchased it as a wreck.
image.jpgimage.jpg
 

Gerard

Luke Skywalker
Country flag
Offline
The only thing I would add is that you will find that parts are very expensive and hard to find for the smooth case gearboxes. Also, unless you have specialized tools and equipment, replacing synchros is not a "shade tree" job and will need to be done by a specialist. Unless you are doing a concourse restoration of just want to keep the car 100% original, you should consider upgrading to a later rib case gearbox. They are a much more durable gearbox too. Since you are just down the peninsula from me, I have several excellent condition rib case gearboxes, and even a couple smooth case ones, if you are interested.

San Carlos has a LOT of paint/body shops I have experience with a couple of them and can tell you who to steer away from and who's good. I have a Morris Traveller in one down there now.
 

BlueMax

Jedi Warrior
Offline
Did you know you can have both ways? It will take some machining to the case but you can put the late model rib case gears inside the smooth case and no one would ever know!!
 
OP
T

tiiM5

Senior Member
Gold
Country flag
Offline
Gerard, I have a good smooth case to replace my current, in which first and reverse clunk, I also purchased a couple of years ago a rib case, I don't know the condition, noisy or sincere issues. I did take the side plate off and everything looked ok to my novice and untrained eye. I realize there are advantages to switching, I might want to send the rib case out to have someone trained look at it.
I have also heard the innards are the same, is the machining significant? Will that solve the PP, Fork, TOB, slave cylinder issues resulting from the switch to Rib Case?

Love to hear about body/paint shops in area. I am informed more reasonable pricing exists in the east bay.

Thanks Gents for the continued advice and assistance.
 

Gerard

Luke Skywalker
Country flag
Offline
Gerard, I have a good smooth case to replace my current, in which first and reverse clunk, I also purchased a couple of years ago a rib case, I don't know the condition, noisy or sincere issues. I did take the side plate off and everything looked ok to my novice and untrained eye. I realize there are advantages to switching, I might want to send the rib case out to have someone trained look at it.
I have also heard the innards are the same, is the machining significant? Will that solve the PP, Fork, TOB, slave cylinder issues resulting from the switch to Rib Case?

Love to hear about body/paint shops in area. I am informed more reasonable pricing exists in the east bay.

Thanks Gents for the continued advice and assistance.

I've rebuilt many, so if you want help with it, let me know. There's really not much you can tell with the side cover off, but I can measure the synchros and check for a couple other things and tell you if it's usable as-is or not.

As far as putting a rib case on a 948, no, there are many differences. See my Tech article on the subject.

https://gerardsgarage.com/Garage/Tech/TO_Bearings/tobearings.htm
 
Similar threads
Thread starter Title Forum Replies Date
B MGB-GT Best rust repair person/shop on the East Coast? MG 2
B Best shop floor surface? Triumph 21
N Best shop manuals and restorations Guides. MG 9
mctriumph TR2/3/3A the best kinda folks Triumph 2
K TR2/3/3A What is the best way to prevent the crank from turning ........ Triumph 27
tr6nitjulius For Sale "SOLD" Winter projects: Upgrades 4Sale or Reasonable Best Offer Triumph Classifieds 0
AngliaGT MGB-GT The Best Laid Plans....... MG 3
69MGC T-Series Best Technique to Clean a Canvas Top MG 3
Michael Oritt Best Seat Trim Adhesive Austin Healey 8
J Best Aluminum Fenders? Austin Healey 3
1 TR2/3/3A Best Rustproofing for inside of body. Triumph 7
G Best fuel option for a 72 Midget Spridgets 5
Celtic 77 MGB Looking for best info regarding throttle cable replacement. MG 16
JPSmit some days your best tool is a credit card Spridgets 2
dripdripdrip TR2/3/3A Best place for tonneau & hood stick covers? Triumph 2
D The best place to get shocks rebuilt. Spridgets 8
Joel Lester TR2/3/3A Advice for which head gasket material is best Triumph 8
BoyRacer Best-Sounding Muffler - Stainless Steel or Mild Steel? Austin Healey 9
W Best source for Bugeye front shocks Spridgets 3
J For Sale For Sale - 2x TR6 seats in red vinyl - Best Offer! Triumph Classifieds 1
Bob Claffie Best cruise in of the year Spotted 8
longbridgehealey Best way in Austin Healey 2
B TR4/4A What really is the best clutch/bearing combo Triumph 4
I Best glue for rubber door panels? Spridgets 3
N Best cam choice??? Spridgets 5
R TR2/3/3A Best day ever [so far] Triumph 1
C How best to restore red script on valve cover? Austin Healey 7
F Best $25 I've ever spent on my Healey - 2019 Austin Healey Concours Guidelines Austin Healey 0
FlyingCat Spitfire Which carburetor is the best? Triumph 9
T TR2/3/3A Where is best spot to check temp with infrared thermometer? Triumph 17
D Best little tube bender Restoration & Tools 8
N Best lube for a Datsun gearbox?? Spridgets 6
Kleykamp For Sale 1978 MG Midget Best Offer Spridgets Classified 0
DornTRoriginal TR2/3/3A Electrical Wiring Best Practices Triumph 13
I General TR Best car cover Triumph 8
M Best Interiors Austin Healey 20
Jer Confirming the best choice for clutch / release bearing for my 67 Midget Spridgets 2
N Best carpet glue???? Spridgets 5
S Best Ethylene Glycol/Water Ratio to avoid overheating? Why? Informal Survey. Austin Healey 27
B best diff British Motor Corp 5
Boink Pre-War MG-TB wins best in class at Forest Grove Concours MG 7
T TR2/3/3A What is best way to flush engine after antifreeze got in oil?? Triumph 2
GTP1960 Not the "best car ever made" by a long shot Other Cars 14
glemon Mercedes 450SL Best Car Ever Made? Other Cars 7
cpbol Best alternative option to sleeved thermostat? Austin Healey 9
MisterB Spitfire Best year for a Spitfire? Triumph 12
D TR4/4A Best SU overhaul service to use? Triumph 10
K TR2/3/3A What is best way to remove old nylon/rubber bush 525-020 from steering box shaft? Triumph 5
Gerald_Gordon TR4/4A Best carpet for TR4 Triumph 2
C Best Replacement BN1 Leaf Springs Austin Healey 5

Similar threads

Top