• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

ARP bolts

Share this page

healeyboz

healeyboz

Jedi Knight
Offline
ARP instructions for "stretching" the bolts says to torque the rod bolts to 50 lbs and release 2 times and leave at 50 the 3rd time. The books says that the rod cap bolts need to be torqued to 40 lbs. Which should I go with? Do I go with factory or do I go with ARP?

Barry
 
Also, make sure you carefully read the ARP instructions on proper lubrication of the bolts, as the torque specs will vary depending on the lubricant used.
Jeff
 
50 ft. pounds is correct, follow the ARP instructions. I've probably installed about a hundred sets.
 
As Jeff said, follow ARP and use the lubricant they recommend and sell.
 
Back
Top