-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR6 Are TR6 dasboards the same as TR4A?
- Thread starter karls59tr
- Start date
Share this page
Marvin Gruber
Yoda
Offline
Gauge openings and layout are pretty much the same. Its the fresh air vents on the ends that are the biggest difference. You could swap out the metal dash frame underneath the wood and make one work either way.
Marv
Marv
sd80mac7204
Jedi Warrior
Offline
There are a few differences as to switch size, type, and location. Gauges are the same size but otherwise they can be very different depending on year and equipment.
Foura
Jedi Hopeful
Offline
The centre switch panel is different also. On the 4A, the "cowl" is under the switches, and the bottom of the timber dash is straight at that point. On the TR5/6 the cowl is over the switches and the bottom of the dash is indented to suit. How do I know all this? The timber dash panel on my 4A is a bitsa. 4A air vents with 5/6 centre panel. Long story. All you need to know is that it looks great and was cheap!