• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A Any thoughts on this part?

Share this page

D

DavidApp

Yoda
Gold
Offline
I found this part attached to one of the front bumper mounting irons in my TR3A kit.

Any thoughts on what it is or has it been bent out of shape?

David
Odd part.jpg
 
That goes from the steering box attaching bolt down to the lower frame on one of the bumper bracket bolts as an insurance policy in case the steering box welds breaks. Plus in needs a spacer and is a little bent.
 
Where else could you find that answer, in 5 minutes before morning coffee no less!
 
Thank you.

The depth of knowledge here is impressive.

Thank you again for the help. There may be a spacer on the bolt. I will check when I get back in town.

David
 
Back
Top