• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Any thoughts on this part?

Share this page

D

DavidApp

Yoda
Country flag
Offline
I found this part attached to one of the front bumper mounting irons in my TR3A kit.

Any thoughts on what it is or has it been bent out of shape?

David
Odd part.jpg
 
That goes from the steering box attaching bolt down to the lower frame on one of the bumper bracket bolts as an insurance policy in case the steering box welds breaks. Plus in needs a spacer and is a little bent.
 
Where else could you find that answer, in 5 minutes before morning coffee no less!
 
Thank you.

The depth of knowledge here is impressive.

Thank you again for the help. There may be a spacer on the bolt. I will check when I get back in town.

David
 
Back
Top