• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Another darn heater question

Share this page

jlaird

jlaird

Great Pumpkin
Offline
Ears to bolt heater box to body are about 1/4 inch lower than the bottom of the box. The bottome of the box also has 6 small holes in it, small finishing nail size.

Now what do you supose was in that space? Nothing in the Moss catalog that I can find.
 
Jack

No nail holes should be there, it s/b a bit lower I have 1/8 inch which is filled with sealeant when box is fitted (4 bolts on ears).

Patrick
 
Correction I have two of the units, one no good. Both have 4 small like nail holes. Guess I will find some closed cell foam to fill the space and make a seal.
 
Hey Jack,
I used door weather stripping for my 78 Midget. It filled the thin gap and worked well.
Rick
 
I can't think what the nail holes are, but there should be a foam gasket the same size and shape as the heater box
 
Back
Top