-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Additional fuses
- Thread starter John Sims
- Start date
Share this page
Offline
Depends on how many fuses you want to add.
First would be the red wire on the back of the lighting switch. This wire feeds the front & rear running/park lights & most importantly, the number plate light. If the car gets the rear bumper whacked it frequently cuts into the number plate light feed & causes a short circuit. 10 amp USA inline should work.
An alternate would be an inline fuse in the boot just for the number plate light.
Next would be the white/green wire from the OD relay to the gearbox 3-4 switch. If the contact on top of the OD solenoid fails to open as it sometimes does, the OD solenoid will rapidly burn up. 20 amp USA should work.
Sometimes folks fuse the fuel pump supply lead, one of several white wires at the fuse block. This wire is kind of vulnerable to getting mashed under the frame. 10 amp USA would be ok.
These last two are readily acessible at the existing fuse block & you could add another OEM fuse block next to or below the existing block.
This is only my suggestion. Other folks may have different ideas. Any additional fuses are better than nothing.
D
First would be the red wire on the back of the lighting switch. This wire feeds the front & rear running/park lights & most importantly, the number plate light. If the car gets the rear bumper whacked it frequently cuts into the number plate light feed & causes a short circuit. 10 amp USA inline should work.
An alternate would be an inline fuse in the boot just for the number plate light.
Next would be the white/green wire from the OD relay to the gearbox 3-4 switch. If the contact on top of the OD solenoid fails to open as it sometimes does, the OD solenoid will rapidly burn up. 20 amp USA should work.
Sometimes folks fuse the fuel pump supply lead, one of several white wires at the fuse block. This wire is kind of vulnerable to getting mashed under the frame. 10 amp USA would be ok.
These last two are readily acessible at the existing fuse block & you could add another OEM fuse block next to or below the existing block.
This is only my suggestion. Other folks may have different ideas. Any additional fuses are better than nothing.
D