• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

A favor

Share this page

regularman

regularman

Yoda
Country flag
Offline
I wonder if someone can do me a favor. The last thing I did before setting the midget project aside until this fall is go through the wiring harness off the car and recover and repair it and label where each wire goes, etc. I bought the haynes resto manual but it did not help me for what I need. I need someone to take a few pics of where all the wiring harness goes, as in what wires go through what holes on the firewall. I should have taken some pics myself before removing it but there had been an oil gauge line leak on that side of the firewall and the whole area was a greasy dirty, oily mess. I would much appreciate any help someone could give me on this. Kim
 
Well that is only for a bugeye, but it is a start. My car is so wrong that a picture of mine would only confuse.
 
Back
Top