I recently purchased a dealer install under dash mount type A/C unit for my '77 MG-B. It has a new Sanyo type compressor. However, I have not yet taken the time to install it as I intend to swap out both the alternator and to install a gear reduction type starter at the same time. My "B" has the original style pusher fans in front of the radiator, which seem to be working OK as I have not had any over heating issues yet. I intend to replace them with a low draw high output 16 inch puller fan mounted behing the radiator so as to free up more space in front for the A/C condenser.
(FYI, I am in northern Alabama at this time.)
The engine was totally rebuilt less that 5,000 miles ago. It has a Weber 32/36 carb and Peco header with 2 inch pipe to a Flowmaster muffler system.
Basically, I am looking for any comments, tips, or advice.
Thanks,
Ray
[ 04-26-2004: Message edited by: 8NFord ]</p>
(FYI, I am in northern Alabama at this time.)
The engine was totally rebuilt less that 5,000 miles ago. It has a Weber 32/36 carb and Peco header with 2 inch pipe to a Flowmaster muffler system.
Basically, I am looking for any comments, tips, or advice.
Thanks,
Ray
[ 04-26-2004: Message edited by: 8NFord ]</p>