• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

'70 FHC window frame and glass removal

Share this page

G

Goodfellow

Freshman Member
Offline
Been stumped on how to remove the passenger door window frame on a '70 FHC. All assembly drawings, pictures and R&R procedures shown in the manuals are from older versions.

How do you separate the lifting arm from the track in order to get the window assembly out?

Thank you --
 
Not exactly sure on a 70, but normally you raise the window a bit for clearence, and unbolt the regulator from the door. Then slide the regulator back, forward, up, down, and usually curse a bit, and roll the rollers out of the ends of the tracks. You will see that there is *just* enough room to do that On really tight quarters, sometimes you have to tilt the glass to facilitate getting the rollers out.
 
Back
Top