• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

'70 FHC window frame and glass removal

Share this page

G

Goodfellow

Freshman Member
Offline
Been stumped on how to remove the passenger door window frame on a '70 FHC. All assembly drawings, pictures and R&R procedures shown in the manuals are from older versions.

How do you separate the lifting arm from the track in order to get the window assembly out?

Thank you --
 
Not exactly sure on a 70, but normally you raise the window a bit for clearence, and unbolt the regulator from the door. Then slide the regulator back, forward, up, down, and usually curse a bit, and roll the rollers out of the ends of the tracks. You will see that there is *just* enough room to do that On really tight quarters, sometimes you have to tilt the glass to facilitate getting the rollers out.
 
Back
Top