• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

1st oil change on rebuilt motor

Share this page

prb51

prb51

Luke Skywalker
Offline
Ok, got 500 miles (almost) on newly rebuilt motor.
Is it too early to go to a syn oil (amsoil 10-40, good flat tappet stuff) or should I wait a bit for more 'wear-in'...
Suggestions?
 
Unless you have noticed problems with excessive oil burning, should be no problem with synthetic.
 
Then the rings are seated as well as they will ever need to be; and there is no reason not to switch to synthetic if you please.

I run Valvoline 20W50 full synthetic in all my Triumphs; it seems to work well. No experience with Amsoil, though.
 
Never used it either but it was recommended to me by a friend...they make it specifically for flat T motors as it has the old levels of ZDDP in it.
Thanks Randall for the info btw.
 
Back
Top