Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I now have a whine from my Differential and it's probably time to rebuild it. No clunking but when letting off the gas
it makes a noise. All rubber mounts, rear wheel bearings, U joints, Diff steel mounts were replaced.
My Triumph Buddy gave me a used one from a donor 1976 TR6 with reported 55K miles.
Looked like it had never leaked but did have dried caked up oil. So I cleaned it up to inspected the gears, paint then seals etc. I then found it had very little oil 4/5oz in it. It was removed from the donor and but never drained. So becomes my story.
The gears looked good, very litle play, no rust or missing/ broken teeth, no harsh smell. So that's scary. How did someone drive the car like that.
I wanted to minimize my down time so I could rebuild the spare and keep the installed one for another project.
A good diff mechanic I know can rebuild the donor.
BPNW has the best prices on bearings etc so I am thinking of calling them. Let me know your opinion. Should I drop $500 on it or is it too much of a risk. Rebuilds start at $1300 + Shipping.
Thanks.
it makes a noise. All rubber mounts, rear wheel bearings, U joints, Diff steel mounts were replaced.
My Triumph Buddy gave me a used one from a donor 1976 TR6 with reported 55K miles.
Looked like it had never leaked but did have dried caked up oil. So I cleaned it up to inspected the gears, paint then seals etc. I then found it had very little oil 4/5oz in it. It was removed from the donor and but never drained. So becomes my story.
The gears looked good, very litle play, no rust or missing/ broken teeth, no harsh smell. So that's scary. How did someone drive the car like that.
I wanted to minimize my down time so I could rebuild the spare and keep the installed one for another project.
A good diff mechanic I know can rebuild the donor.
BPNW has the best prices on bearings etc so I am thinking of calling them. Let me know your opinion. Should I drop $500 on it or is it too much of a risk. Rebuilds start at $1300 + Shipping.
Thanks.
