• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

1970 XKE 4.2 rear main seal

Share this page

B

bnw

Jedi Warrior
Country flag
Offline
Is it possible to replace the rear main seal on a 1970 4.2 E Type without removing the engine? If so, HOW?
 
This is one of those: "Don't even try it!" things. There just is not enuff room under there to get the gearbox away.

I know a "trick" to be able to change the clutch, but that involves drilling a 1.5" HOLE in the bellhousing...

It's just easier/safer/smarter to pull the whole thing out of the car.
 
Unfortunately as above all must come out. I've seen it done, but takes just as much time. There is a new modern seal for the rear, but the crank has to be turned to accept it.
 
Back
Top