• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

1962 3000 MKII BT7 Water pump replacement

Share this page

J

JamesM

Freshman Member
Offline
Hi Guys,

About to replace the water pump. Is it possible that I have to remove the radiator? It doesn't look like there will be clearance to remove the pump. Any suggestions? Thanks J
 
I replaced my pump several years ago and do not remember removing the radiator. It probably would make it easier, and save some knuckle skin, but at worst you could try loosening the top bolts to get some more clearance.
 
Thanks Tim,

I found the service manual, and it indeed says to remove the radiator and the dynamo. That did not make sense to me. Much as you suggested, I was able to remove the radiator bolts and tilt it forward, allowing plenty of access. James
 
Welcome James, to the forum. You'll find lots of help here. Some of us give and take, some only give, and others only take. We welcome all types. Thanks for the feedback on the help given and the results of your efforts.
 
Back
Top