Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
WHERE WOULD I FIND GOOD INFO ON HOW THIS CAR LEFT THE FACTORY, THE ONLY PLATE ON THE FIRE WALL ONLY HAS TWO 4 DIGIT NUMBERS AND NO WORDS OR LETTERS? THE CAR WAS BROUGHT TO US IN PEICES A LITTLE WHILE BACK AND NOW WE ARE TRYING TO GET IT ALL BACK TOGETHER. AND THE OWNER WANTS AN ORIGINAL RESTORATION.
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
1958 BN4 AUSTIN HEALEY
- Thread starter BRADY
- Start date
Share this page
Offline
Hi Brady,
As was explained, you have a missing tag.
You could get a start here. Obtain a factory production record for the car. BMIHT can find the original missing tag info from the numbers on the plate that you have. The BMIHT info can be found here.
https://www.healey.org/production.shtml
On the plate thay you have, the first four numbers are the batch number. The second four are the body number. Looking up the body number in one of the books previously mentioned can give you a clue as to what & when, but the missing tag which contains the car number info will be necessary to pin things down exactly. Reproducing this tag will be necessary for a restoration anyway. A reproduction tag with the correct number can be obtained.
The engine number may or may not be the original.
Start with the books, & BMIHT, & go from there. A good place to start is here: https://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29492&SortOrder=1
As was explained, you have a missing tag.
You could get a start here. Obtain a factory production record for the car. BMIHT can find the original missing tag info from the numbers on the plate that you have. The BMIHT info can be found here.
https://www.healey.org/production.shtml
On the plate thay you have, the first four numbers are the batch number. The second four are the body number. Looking up the body number in one of the books previously mentioned can give you a clue as to what & when, but the missing tag which contains the car number info will be necessary to pin things down exactly. Reproducing this tag will be necessary for a restoration anyway. A reproduction tag with the correct number can be obtained.
The engine number may or may not be the original.
Start with the books, & BMIHT, & go from there. A good place to start is here: https://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29492&SortOrder=1
Keoke
Great Pumpkin
Offline
Hi Brady, There are a set of standards that cover these cars.They are available from "Walt Blanc" I do not have his addy but others on this forum will.Additionally, a book Authentic Restoration Guide,By Gary Anderson And Roger Moment is available from most Austin Healey Parts suppliers.---Fwiw---Keoke
anthony7777
Yoda
Offline
hope the missing tag was not used to register an identical stolen car!as ive seen this happen befor!