• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

1275 carb linkage

Share this page

TulsaFred

TulsaFred

Jedi Warrior
Country flag
Offline
Putting the carbs on the rebuilt 1275 that will go in the B/E.
Seems I am missing the choke linkage and possibly part of the accelerator linkage.
Cant find a real clear picture or diagram.
Can anyone post detailed photos of the carb set up?

Thaks much
Fred
 
If anyone has a spare set of choke linkage for dual HS2's let me know and I'll buy.
Thanks
Fred
 
How 'bout this
There are three return springs from linkage to heat shield.
. Two long and one short
Where do they go?
Fred
 
TulsaFred said:
How 'bout this
There are three return springs from linkage to heat shield.
. Two long and one short
Where do they go?
Fred
Click to expand...

Mine (I only have one and need to get another) goes to the triangular cutout on the inner fender. Don't know if there was ever really "a place" just a spot to hook it on.
 
Fred--these photos are pretty bad, but they might help. The choke cable stop is something someone improvised. It doesn't work quite right.

Carblinkage3.jpg

carblink2.jpg

Carblink1.jpg

Charlie
 
Fred--
This shot of the linkage on another fellow's car appeared on the MG Experience website this week. Hope he doesn't mind I post it here. I'll take it off it he does. Disregard the arrows.

Tyscarb.jpg

Charlie
 
Short springs to each butterfly. Long Spring to the throttle cable linkage.
 
Awesome,
I love you guys!
that's just what I needed
 
Back
Top