• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

100-4 trans specs

Share this page

Bruce Bowker

Bruce Bowker

Obi Wan
Offline
I had the BN 2 trans rebuilt due to popping out of gear but it still does in 1st and 2nd. We have no specs to speak of regarding end play etc. Does anyone have such information?

It has new hub and syncro etc. Basically pretty new inside. We just don't know clearances etc.

Thanks for ANY help.

Bruce
 
Did you replace all the balls and springs for the shift fork/rod detents?

All the xmsns I've done, I've always replaced them, and the ones in the synchro hubs (if they were reused). It's always cured the symptom of popping out of gear, no matter how bad it was beforehand.
 
Randy - thanks very much for your suggestion. I'll check with the mechanic on this.

Bruce
 
Back
Top