• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR4/4A Routing of TR4A Fuel Line

Share this page

KVH

KVH

Darth Vader
Silver
Country flag
Online
I found this pic online. Is it safe to say that the fuel line on a 4A runs through the T-Shirt?

1688946477043.png
 
Yes, I can't imagine any other way it could be routed. Otherwise, at some point, it would have to cross under the frame, I think, and that really wouldn't be a good design.
 
Yes, thanks, I just saw a drawing that had me concerned. It showed grommets that made me suspect frame pass/thrus, but I suppose the grommets are just buffers ( or who knows). Probably just me looking for something to worry about.
 
KVH said:
Yes, thanks, I just saw a drawing that had me concerned. It showed grommets that made me suspect frame pass/thrus, but I suppose the grommets are just buffers ( or who knows). Probably just me looking for something to worry about.
Click to expand...
Some of the parts suppliers call out fuel line grommet CD23720 for the TR4A. This is incorrect; however I believe it is needed for the TR4. The 4A lines do not go through the frame; only through the t-shirt.
 
Just went thru this routing and I was concerned about the exhaust being close but that is the factory routing. There is a one or two clips inside the "tunnel" to hold the line. Bruce
 
Back
Top