• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

wish I had the skills

Saw this a few years ago in an MG magazine - stunning!
 
Could a V-8 fit into a Sprite under "ordinary" circumstances? It looks like an awfully small engine bay! I had a guy pull up alongside me one night and tell me he had a '62 car like mine that had a V-8 in it. I'm convinced that he confused my Sprite with an MGB, since they have similar taillights. To be honest, I was never very certain of the differences between Spridget and MGB until I started researching the topic when I saw the car that I eventually bought for sale.
 
Could a V-8 fit into a Sprite under "ordinary" circumstances? .

Sure:

2631616372_a8e5a2e037.jpg


V8s have been going into Sprites for decades, but they all require some modification, usually to the heater/battery platform and driveshaft tunnel. They'll need a new transmission, driveshaft and rear axle as well. The more ambitious ones usually get a custom chassis thrown in as well. It's not a modification for those without some major skills and the real trick is not to wreck the handling by putting too much weight over the front end.
 
Back
Top