• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Advice on how to get VIN number stamped into new plate

Share this page

Joel Lester

Joel Lester

Senior Member
Country flag
Offline
Getting very close to finishing up my TR3 restoration and I got one of those new plates for the VIN under the hood. Does anyone have advice on where or how to get the my VIN number stamped into the new plate?

Thanks in advance!

Joel
 
I bought a set of lettered punches at Princess Auto for just this purpose. After careful alining in a bit of a jig, it worked well. To give the new plate some patina I threw it into a tin of old nuts and bolts and gave it a good shake. Worked out well.
 
Frank_D said:
I bought a set of lettered punches at Princess Auto for just this purpose. After careful alining in a bit of a jig, it worked well. To give the new plate some patina I threw it into a tin of old nuts and bolts and gave it a good shake. Worked out well.
Click to expand...
Awesome! Princess Auto... I didn't think of them. I'll check it out.
 
Please note, the originals are not exact, so don't get it too perfect
 
I purchased a full set of 3/16 letter/number stamps from amazon for less than$20.
Lots to choose from so you can get close to original fonts.
Tom
 
My advice is to save the original plate and by going inside the car and( using longer rivets), fix it to the backside
of the new one.
MD
 
TFB said:
I purchased a full set of 3/16 letter/number stamps from amazon for less than$20.
Lots to choose from so you can get close to original fonts.
Tom
Click to expand...
Anyone know what the original fonts were?
 
mezy said:
Not in the know, but are the originals stamped into or raised letters like on most cars.
Click to expand...
They were stamped in Triumph and MG cars, hand etched in all the Lotus cars I've seen (or owned).
Haven't yet found a good set of stamps to mimic the original fonts. Close, but not "concourse correct".
 
Back
Top