TR2/3/3A Differential cover torque

[weldersa]

I'm trying to find the torque values for bolts holding differential cover on TR3A

 

[CJD]

In on page 15 of the General section of the service manual...16-18ft lbs

 

[Hamish Racing]

Sound about right. Same as the sump isn’t it ?

doesn’t need to be too tight.

 

[weldersa]

In on page 15 of the General section of the service manual...16-18ft lbs

Thanks

 

[sp53]

I usually cut my own gasket for that out of a heaver gasket paper because the aftermarket gasket for the differential always seem too thin and then still put some sealer on one side. I knew a shop that would use only RTV and then tighten the cover just a little and then then next day snug it to torque specs
steve