-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
LED lights for PL 700
- Thread starter jimbohoh
- Start date
Share this page
Offline
Why? Me thinks you loose the vintage look of the lamp with LED bulbs.
I would like a brighter light for night driving without going to H4 halogen bulbs. I would especially like to decrease the current draw to prolong the life of the headlight switch. I am willing to sacrifice some of the looks for the above reasons. Easy to change back to original,
Thanks for your reply,
Jim
Thanks for your reply,
Jim
Offline
Hi Jim,
not sure of what the effect would be on the reflector? May not work for you?
good luck with it.
not sure of what the effect would be on the reflector? May not work for you?
good luck with it.
A PO installed LED bulbs in the "R100" Lucas headlamps on my Bentley. I got a set of incandescent bulbs as part of the sale, along with a warning to "change back when you go to a show!" Nobody has dinged me for them so far.
The bulb on the R100 model is hidden behind a shield, so they look perfectly stock to everyone but a knowledgeable concours judge. Unless you are looking for it (and you know what to look for), you can't tell.
They throw a very white light down the road. I would bet (based on experience with pre-war American cars) that they are brighter than stock. And the manufacturer designed the bulbs to emit light in a similar pattern to an incandescent, so the pattern off the reflector is similar.
Does the PL-700 have a similar shield over the bulb? If so, you're good to go!
The bulb on the R100 model is hidden behind a shield, so they look perfectly stock to everyone but a knowledgeable concours judge. Unless you are looking for it (and you know what to look for), you can't tell.
They throw a very white light down the road. I would bet (based on experience with pre-war American cars) that they are brighter than stock. And the manufacturer designed the bulbs to emit light in a similar pattern to an incandescent, so the pattern off the reflector is similar.
Does the PL-700 have a similar shield over the bulb? If so, you're good to go!
Offline
Nice to know. I am not keen on the look of LEDs. I have a car here that I have fully converted….time will tell.
Is that a mark 6 Bentley that you have??
Is that a mark 6 Bentley that you have??
If it's good enough for a Bentley then it's good enough for my TR3! I plan on driving the car a lot and any shows I might enter will not be to win any trophy. I have made several other upgrades to the car, none of which are irreversable.
Do you know what brand or model # LED bulbs you have and if the bulbs required any modification to fit. The PL 700 does have a curved shield that partially covers the bulb. Will send some pictures if anyone is interested.
Thank you very much
Jim
Do you know what brand or model # LED bulbs you have and if the bulbs required any modification to fit. The PL 700 does have a curved shield that partially covers the bulb. Will send some pictures if anyone is interested.
Thank you very much
Jim
Offline
what model Bentley is that you have?
full conversation done with housings that resemble sealed beam units.
full conversation done with housings that resemble sealed beam units.
Offline
According to Moss, these P45T bulbs fit original PL headlamps. One can Google for P45T bulbs. Amazon has some.
Almost! It's an R-Type.
Jim, the spare incandescent bulbs (marked "Blick 12V 45/40W G13") now reside in a small box labeled:
6-24v NEG EARTH P36d (BPF)
40/36W "DOUBLE DIPPER" BULB
FA1A
Classic Dynamo and Regulator Conversions
www.dynamoregulatorconversions.com
edit: The FA1A is for the R.100 type lamp; as John T mentioned above you may need the P45T version. CDRC should have that version as well.
Offline
Ah, ok. Nice motor.
most LED lamps come from Lew Palmer. He sells to Moss, etc. but will sell directly to you if you prefer.
most LED lamps come from Lew Palmer. He sells to Moss, etc. but will sell directly to you if you prefer.
Offline
Excellent.