• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Electric fuel pump wiring

Share this page

R

rossco

Jedi Trainee
Country flag
Offline
Please check my work. 59 Bugeye, positive ground. SU Pump is bolted to frame. Is that my ground? Wire goes from screw terminal to ignition switch white terminal. Is that it or do I need something to the control box and/or coil?
 
rossco said:
Please check my work. 59 Bugeye, positive ground. SU Pump is bolted to frame. Is that my ground? Wire goes from screw terminal to ignition switch white terminal. Is that it or do I need something to the control box and/or coil?
Click to expand...
That should do it!
 
Can I just run my fuel pump hot wire to the white wire terminal at the fuse block? It's easier than crawling up under the dash!
 
Back
Top