• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
  • NOTICE: This "Classifieds" forum is expressly for posting items for sale or wanted. Post any technical question in the appropriate marque forum!

    IMPORTANT: Please be aware that there are a lot of scammers on forums like this, so please exercise due diligence as we can't be responsible for transactions between members. See this thread for at least one type of scam to be aware of: Private Message Scam (there may be others)
    If you are suspect of a member being a scammer, please send me a PM with details.

Tips
Tips

For Sale BJ8 and BT7 parts for sale

Healey Nut

Luke Skywalker
Country flag
Offline
******BEEN CLEANING UP MY SHOP DOING INVENTORY MANY NEW PARTS ADDED , SEE BELOW .****
Please note ***********
If you are inquiring about parts and want a shipping cost I need a FULL mailing address inc post/ZIP code to get a UPS quote and a current active email address if you want any pics of the items .
Tks .
I have added AH spares part numbers to a lot of this stuff for reference as we all have different terminology for parts .
Lots of leftover parts from BJ8 and BT7 Tri Carb restorations .Need to unload some of this stuff to some needy owners . Offers welcome on anything .
Three ground up restorations done that’s all for me , this stuff needs to find new homes and be used to keep these old cars going .
PM me for costs and shipping info .
Parts are slowly disappearing to new homes , do t sit on the fence too long or they will be gone !!!!!!
Make me sensible offers on all items I'm not looking for huge $$$ just want help enthusiasts keep them on the road , I also have some stuff not listed . Just ask I may have what you need .I even have some brand new small parts unused as well .
Let keep these old girls on the road
BJ8 Door card clips TRP251 - 12 new
Upper Door hinge BJ8 used
seal clips new 10 DRF236
BRK236 felt washer 8 new
2 wood horizontal section above window for soft top used
1 pair wood seat rail used original SET116
1 battery backer wood used original ELG205
Alternator /dynamo adjustment pillar mount.
1- complete propshaft adjustable type .
1-original non enamel front shroud AH wing badge MK3
1 -set rear axle U bolts , brand new . SUR142
4 - hydraulic hose star lock plates CL4172 Ahead for Healey number
1- bullet mirror MRS108
1- regular wing mirror MRS105
4 short wheel spokes new WHE162
4 long wheel spokes new WHE163
2-twin cable choke firewall bracket CBS126
2- 7” sealed beam units all working LTG172
6 orange indicator lenses LUCAS LTG141
2 clear lenses Lucas LTG122
1- acorn top coil good resistance
1- regular coil good resistance ELI140
Various sizes wire type hose clamps CHT161a style
4- used but good A arm pins and nuts SUF132
2- fulcrum pins and cap nuts SUF108
8 large rubber side light etc body gaskets new LTG143
16 soft foam plastic lens gaskets new LTG146
Large heater hose support clamp flat metal type CHT163
1-thermostat sleeve
1pair bonnet safety latch plates BON141
1 chrome boot strap staple WHE178
1set front shroud grill brackets GRL129
1- complete mechanical tach drive unit .
1- BT7 vertical bar grill GRL103
Trunk prop rod bracket BOT126
1- hood prop rod bracket BON140
1- brand new pair plastic headlight buckets 2 adjuster with retainer ring . LTG182
1-generator with pulley and coil mount bracket
1- perfect condition generator mounting plate . ENG776
1-BT/BJ7 rear upper soft top trim rail .
1- BT7 clutch pressure plate
1-rear engine plate
1- front engine plate
2- full sets original pistons standard size very useable condition .
1- set original Con Rods
2-BJ8 fuel filler tubes
2- oil filter assemblies, with 90 degree adaptor piece.
3-Oil filter elements paper type .
3-oil pumps
1- full set main bearing caps .
1-pair Girling brake servo bracketsBRK317
1-stub axle right side /hub extension , good splines coarse thread .RAX205
1- pair wing flashes originals
4-chrome BJ8 door waist moldings originals , good rechrome candidates
1-BT7 flywheel with starter ring
1-BT7 Harmonic balancer ,for core or rebuild .
1-distributor drive gear
1-oil pump drive gear ENG674
1-BT7 crankshaft for regrind
1-timing gear cover ENG780
1-original spare wire wheel original paint in good condition with bias ply tire ,perfect for concourse
2- sets original valve cover cap nuts ENG740 NOT STAINLESS .
1-set timing gears useable
1pair new radius arm bushings SUR166
2- brand new rear spring bushings SUR125
1- original fuel pump with BT7 mount plate (non electronic) in good rebuildable condition .Note ***Round body SU***
1- original panhard rod for BT7 , sandblasted primed and painted plus new bushings and bracket etc .
misc internal engine parts , main caps , timing chain adjusters etc .
other ods n ends not listed …..just ask me I may have what you need .
 
Last edited:
With the sale of both my BJ8s Im open to offers on all the BJ8 parts . Just looking to help keep these old girls running .
 
NO slide bolts available. Sorry .
 
Sorry that’s long gone , I used it to repair my boot lid for my TriCarb project . Made one good one out of two and scrapped the rest .
 
Sorry that’s long gone , I used it to repair my boot lid for my TriCarb project . Made one good one out of two and scrapped the rest .
I didn't think it would be around. I just thought I could replace one that had lots of runs on it, though can be fixed no problem. ldb
 
Any chance you have a tach for a BJ8?
 
Nope sorry , no Tach spare . All the instruments I have are gold face ones .
 
Back
Top