• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Oil pan leak?

Share this page

T

tgsanford79

Freshman Member
Country flag
Offline
Have not crawled up close close yet but curious as to what others think based on the pic. ‘79 1500.

BECE777D-9D0C-4F4A-B66F-0BDE0D30C151.jpg
 
Last edited:
Thanks everyone for the feedback.....getting up close tomorrow and will be more than sure to post what I find. :excitement:
 
Mine continues (i think) to leak - something does. Over tightening the bolts warps the pan and, I have stripped both bolts on the aluminum piece at the front seal. Keep us posted.
 
7 lbs. max torque Pull Pan, place edge over flat steel. hammer dimples flat, new Gasket, sealer, reinstall.
 
Jim_Gruber said:
7 lbs. max torque Pull Pan, place edge over flat steel. hammer dimples flat, new Gasket, sealer, reinstall.
Click to expand...
Yep, try that on your wife’s granite countertop...makes her happy beyond belief!
Rut
 
Oh man are you ever asking for it Rut. Windshield in kitchen then countertops. A braver man than I.
 
According to two different sources I checked, 1500 engine sump to block is 20 ft lbs. A-series sump to block is 6 ft lbs.
 
That's not a leak. That's the chassis self-lubrication system.

If I didn't know better, I'd think you crawled under my car and took a picture. I go through oil at a fairly prodigious rate, but I'm definitely dropping more than I'm burning. At some point, I'll yank the motor and fix it.
 
Back
Top